2200-545 Two-Component No-Drip
2200-545 TWO-COMPONENT No-Drip VALVE
  • Designed for pourable 2-part materials
  • Fast Drip-Free material shut-off
  • Double-acting, Dual Actuating spool rods
  • Long-life Dual Carbide Ball and Seat
  • Wear resistant Elastoplastic seals
  • Accurate position dowel pin mounting
  • 1/4" NPT inlet material ports
  • Adjustable stroke control
  • Carbon Steel wetted components
  • Stainless Steel Optional
  • 3,500 psi Maximum Inlet Pressure
  • Uses No-Flush mixers and Shrouds
  • 3-Port version for wide ratio and viscosities

Typical Applications

  • Low to high viscosity materials
  • Abrasive and filled materials
  • Extrude and stream beads
  • Automated and robotic applications
  • Electronic component potting
  • Filter End Cap molding
  • 2-part Adhesives and Sealants
  • Epoxies, Silicones, Polyurethanes
  • 4-way pneumatic valve required to actuate

 

No Drip
 
 
 
 
2200-545-037 MINIATURE-MIX No-Drip
2200-545-037 MINIATURE-MIX No-Drip® VALVE
  • Designed for pourable 2-part materials
  • Fast Drip-Free material shut-off
  • Double-acting, Dual Actuating spool rods
  • Long-life Dual Carbide Ball and Seat
  • Wear resistant Elastoplastic seals
  • Accurate position dowel pin mounting
  • 1/4" NPT inlet material ports
  • Adjustable stroke control
  • Stainless Steel wetted components
  • 3,500 psi Maximum Inlet Pressure
  • Uses miniature bayonet disposable mixers

Typical Applications

  • Low to medium viscosity materials
  • Abrasive and filled materials
  • Extrude beads or shot volumes
  • Automated and robotic applications
  • Electronic component potting
  • 2-part structural Adhesives
  • 2-part slow and fast cure Sealants
  • Epoxies, Silicones, Polyurethanes
  • 4-way pneumatic valve required to actuate

No Drip

 
 
 
 
 
 
2200-093-000 Micro-Kiss™ No-Drip® VALVE
  • Designed for low-flow mixing and dispensing
  • Fast Drip-Free material shut-off
  • Low-flow fluid control
  • Bayonet style static mixers
  • Carbide ball-end needles
  • Carbide seats for long life dispensing
  • Individual Micro-Kiss actuator valves
  • Double air actuated for 4-way pneumatic valve connections

Typical Applications

  • Bonding, gasketing, potting and filling processes
  • For viscous and abrasive materials

No Drip

 
 
 
 
 
 


2200-250 two-component snuf-bak VALVE
2200-250 TWO-COMPONENT SNUF-BAK VALVE
  • Designed for viscous 2-part materials
  • Immediate Drip-Free material shut-off
  • Highly responsive start-stop of flow rates
  • Double-acting, Dual Actuating spool rods
  • Wear resistant Elastoplastic seals
  • Accurate position dowel pin mounting
  • 1/4" NPT inlet material ports
  • 4000 psi (276 bar) Maximum Inlet Pressure
  • Adjustable Snuf-Bak stroke control
  • Uses No-Flush mixers and Shrouds
  • 3-Port version for wide ratio and viscosities

Typical Applications

  • Medium to high viscosity materials
  • Abrasive and filled materials
  • Extrude and stream beads
  • Automated and robotic applications
  • Hem Flange adhesive bonding
  • Over Hem Sealants
  • Electronic component potting
  • Filter End Cap molding
  • 2-part Adhesives and Sealants
  • Epoxies, Silicones, Polyurethanes
  • 4-way pneumatic valve required to actuate

Snuf-Bak

 
 
 
 

2200-595 series

2200-595 SERIES
2-PART HIGH VOLUME SNUF-BAK VALVE
  • Larger porting for higher flow rate applications
  • Designed for higher viscosity 2-part materials
  • Immediate Drip-Free material shut-off
  • Highly responsive start-stop of flow rates
  • Double-acting, Dual Actuating spool rods
  • Wear resistant Elastoplastic seals
  • Accurate position dowel pin mounting
  • Uses No-Flush mixers and Shrouds
  • Carbon Steel
  • Stainless Steel

Typical Applications

  • High flow rate applications
  • High viscosity materials
  • Large bead sizes
  • High speed automation
  • Heavily filled materials
  • Extrude and stream beads
  • Automated and robotic applications
  • 2-part structural Adhesives
  • 2-part slow and fast cure Sealants
  • Epoxies, Silicones, Polyurethanes

Snuf-Bak

 
 
 
 
 
 


Manual Dispense Valves
2-COMPONENT MANUAL DISPENSE GUNS
2-COMPONENT MANUAL DISPENSE GUNS
  • No-Drip and Snuf-Bak Manual Dispense Guns
  • Adapts to all S.E.E. 2-Component Systems
  • Pistol Grip Handle accepts all S.E.E. 2-Part Values
  • Electric Trigger switch operates meter and valve
  • Rugged all-metal handle assembly
  • Safety components: trigger guard and trigger lock
  • Includes gun hanger post on rear of valve assembly
  • Color coded tubing assures proper connections
  • No-Flush disposable mixers and shrouds available

Typical Applications

  • 2-Component manual dispense applications
  • Extruded beads, filling, potting applications
  • Manual backup applicator for automation or robot

 
 

 

 
 
 
 
 
 


Dual Valve Mix Manifolds
2600-068 Dual Valve Static Mixer
2600-068 SERIES
DUAL VALVE STATIC MIX MANIFOLDS

  • Ideal to ensure a correct mix and flow control
  • Uses standard disposable static mixers
  • Dual independent fluid control valves
  • Dual control valves eliminate check valves
  • Easy to change disposable mixing tubes
  • Tungsten carbide ball-end needle and seats
  • Wear resistant Elastoplastic seals
  • Optional temperature control manifold

Typical Applications

  • Bonding, coating, encapsulating, filling,
    gasketing, molding, potting, sealing
  • Semi-automated and robotic applications
  • 2-part Epoxies, Silicones, Polyurethanes
  • Abrasive and filled materials

 
 

 

 
 
 
 
 
 




2151-482 Dynamic Mix Valve
2151-482 SERIES
POWER STATIC MIX (PSM) VALVES
  • Ensures a complete homogeneous mix
  • Low to high variable RPM servo motor
  • Mixer speed pre-set in operator interface
  • Easy to change disposable mixing tubes
  • Dual control valves eliminate check valves
  • Tungsten carbide ball-end needle and seats
  • Wear resistant Elastoplastic seals
  • Optional temperature control manifold

Typical Applications

  • Bonding, coating, encapsulating, filling, gasketing, molding, potting, sealing
  • Semi-automated and robotic applications
  • 2-part Epoxies, Silicones, Polyurethanes
  • Abrasive and filled materials

 
 

 

 
 
 
 
 
Dispense Valve Selection Guide

2-Part No-Drip Dispense Valves

no-drip

PART NUMBER

PRODUCT DESCRIPTION
2200-545-000-AA Valve - No-Drip Assy - Dual Ball & Seat
2200-545-000-AM Valve - No-Drip Assy - Dual Ball & Seat
2200-545-000-Z8 Valve - No-Drip Assy - Dual Ball & Seat
2200-545-001 Valve - No-Drip Assy - S.S. Dual Ball & Seat
2200-545-001-AM Valve - No-Drip Assy - S.S. Dual Ball & Seat
2200-545-001-Z4 Valve - No-Drip Assy - S.S. Dual Ball & Seat
2200-545-002 Valve - No-Drip Assy - Dual Ball & Seat w/Flush Port
2200-545-002-AA Valve - No-Drip Assy - Dual Ball & Seat w/Flush Port
2200-545-004 Valve - No-Drip Assy - Dual Ball & Seat w/(3) Port Nose Piece
2200-545-005 Valve - No-Drip Assy - Dual Ball & Seat w/TAH Nose Piece
2200-545-011 Valve - No-Drip Assy - Dual Ball & Seat w/Balancer Hook
2200-545-012 Valve - No-Drip Assy - Dual Ball & Seat w/(3) Port Nose Piece
2200-545-014-AA Valve - No-Drip Assy - Dual B&S w/Spring Cap & -AA Seal/O-rings
2200-545-016 Valve - No-Drip Assy - Dual B&S -000-AA w/(3) Port Nose Piece
2200-545-016-Z8 Valve - No-Drip Assy - Dual Ball & Seat w/(3) Port Nose Piece
2200-545-025-AA Valve - No-Drip Assy - Dual B&S /(3) Port Wide Ratio Nose Piece/Flow Control cap
2200-545-026-AA Valve - No-Drip Assy - Dual B&S -000 w/Flow Control Spring Cap
2200-545-037 Valve - No-Drip Assy - Dual B&S w/Twist-Lock Bayonet Mixer

2-Part Snuf-Bak Dispense Valves

snuf-bak

PART NUMBER

PRODUCT DESCRIPTION
2200-250-000-AA Valve - Snuf-Bak Assy Dual Spool
2200-250-000-AM Valve - Snuf-Bak Assy Dual Spool
2200-250-000-Z8 Valve - Snuf-Bak Assy Dual Spool
2200-250-001 Valve - Snuf-Bak Assy Dual Spool w/Flush Port
2200-250-005 Valve - Snuf-Bak Assy Dual Spool w/L&T Mixer Outlet
2200-250-005-AM Valve - Snuf-Bak Assy Dual Spool w/L&T Mixer Outlet
2200-250-006-AA Valve - Snuf-Bak Assy S.S. Dual Spool
2200-250-006-AM Valve - Snuf-Bak Assy S.S. Dual Spool
2200-250-006-Z8 Valve - Snuf-Bak Assy S.S. Dual Spool
2200-250-011 Valve - Snuf-Bak Assy S.S. Dual Spool w/L&T Mixer Outlet
2200-250-012 Valve - Snuf-Bak Assy Dual Spool w/ 2 Solvent Ports
2200-250-016 Valve - Snuf-Bak Assy Dual Spool w/3 Port Nose Piece
2200-250-016-AA Valve - Snuf-Bak Assy Dual Spool w/3 Port Nose Piece
2200-250-021 Valve - Snuf-Bak Assy Dual Spool w/ Balancer Hook
2200-250-022 Valve - Snuf-Bak Assy Dual Spool w/ 7/16-20 Tapped Outlet Ports
2200-250-023 Valve - Snuf-Bak Assy S.S. Dual Spool w/ Balancer Hook

2-Part High Volume Snuf-Bak Dispense Valves

snuf-bak high vol

PART NUMBER

PRODUCT DESCRIPTION
2200-595-002 Valve - Snuf-Bak Assy - 1/2" Hi-Volume Dual Spool w/Nose for TAH Mixer, 1- Outlet Port w/Flow Restrictor Plug & Balancer Hook 1270-0170
2200-595-003 Valve - Snuf-Bak - 1/2" Hi-Volume Dual Spool -002 w/o Flow Restrictor Plug
2200-595-004-AA Valve - Snuf-Bak - 1/2" Hi-Volume Dual Spool -003 w/o Balancer Hook
2200-595-005-Z1 Valve - Snuf-Bak - 1/2" Hi-Volume Dual Spool -004 w/S.S. Wetted Components

 

reqVquote
Related Information:
Static Mixers and Accessories    2-Part Meter-Mix Equipment    Dispense Valves Overview
Automotive Applications    Industrial Applications   Dispensing Principles

Select from our wide range of Precision Dispense Valves for your 2-Component Meter-Mix Dispense application.  We offer basic air operated systems up through robotic applied dispensing systems with touch screen operator interface control.  Let us assist you with your fluid dispensing process by reviewing your requirements and sending you a quote for a high-quality and reliable dispensing valve or system engineered, manufactured and installed by our highly trained personnel.  Our team can also integrate and program your dispensing system with automation or robotic process equipment.  Your new dispensing system will be assembled to satisfy your exact application requirements.

2 Year Warranty

"When it comes to solving liquid dispensing problems, you won't find a
better resource than Sealant Equipment and Engineering."
Home · Dispense Equipment · Equipment Quote · Dispense Valves · Valve Quote · Request Service · Map & Directions · Site Map · E-Mail Us
Sealant Equipment - Plymouth, MI 734-459-8600