3-Tip Multi-Function Gun (2600-022 MFG-3D)

• Three different dispense tips on one tool

• Spray, stream and ribbon sealer materials
• Slim and compact for limited access areas

• Ultra - Fast dispensing speeds

• Shorter program cycle times

Typical Applications

• Paint Shop sealer applications

• Robotically apply stream, spray, and ribbon beads

• PVC sealers, epoxies, and mastics

Multi-Function Gun with Recirculation (MFG-3DR)

• Three different dispense tips on one tool

• Includes sealer recirculation manifold

• Recirculation maintains fluid consistency

• Spray, stream and ribbon materials

• Optional vision camera mounting brackets

Typical Applications

• PVC sealers, epoxies, and mastics

• Robotically apply stream, spray, and ribbon beads

• Robotic vision applications

5-Tip Multi-Function Gun (MFG-5D)

• Five different dispense tips on one tool

• Perform Seam Sealing and Roof Ditch operations

• Spray, stream and ribbon sealer materials

• Slim and compact for limited access areas

• Shorter program cycle times

Typical Applications

• Paint Shop sealer applications

• Robotically apply stream, spray, and ribbon beads

• PVC sealers, epoxies, and mastics

Compliant Tool Applicator (CAT)

• Dispense nozzle is multi-axis compliant

• Access back side of panel from the front

• Apply sealer materials with a slender slot nozzle

• Mounts on EOA tooling and accepts vision system

• Robotically applies manual over-hem sealants

Typical Applications

• Paint Shop sealer applications

• Verify sealant application with vision monitor

• Robotically apply PVC sealer ribbon beads

Roof Ditch Applicator (2600-059 RDA)

• Mounts to robot EOA tooling

• Accepts vision monitor and cameras

• Includes pressure and temperature monitors

• Includes material dispense and re-circulation valves

• Tool tip accepts robotic stream and spray tips

Typical Applications

• Robotically apply PVC, Epoxy and Mastic materials

• Verify sealant application with vision monitor

Servo Ribbon Applicator (2600-034 SRA)

• Servo-Drive nozzle rotates dispense tip

• Fastest cycle time dispense tool

• Saves wear and tear on robot, hoses, cables

• Compact and lightweight for EOA mounting

• Wide selection of stream, spray and ribbon tips

Typical Applications

• Robotically apply PVC, Epoxy and Mastic materials

• Robotically extrude, stream, ribbon or spray materials

Program-A-Swirl Applicator

• Servo-Drive tip streams material in a swirl pattern

• Applies material in a wide and flat swirl pattern

• Improves bead path for less manual cleanup

• Designed to mount on robot EOA tooling

Typical Applications

• Robotically apply sealants and swirlable materials

• Used for wide and flat material applications

Accessories: Nozzles and Tips (1208 Series)

• Stream, Ribbon and Spray tips

• Create various bead profiles

• Stand-off compensates for fluctuations in part surface

• Various styles and orifices available

Typical Applications

• Robotically apply PVC, Epoxy and Mastic materials

• Robotic, High Speed repetitive dispensing

Tip-Seal^® Dispensing Valves

• Valves close material flow and seal at the nozzle tip

• Various length nozzles from 0.32" to 3.29" long
• Low to high viscosity, low to high flow rate designs
• Repeatable position mounting to EOA tooling
• Various orifice diameters available for bead control

Available Options

• High speed mastic stitching applications

• Fast start and stop dispensing applications

No-Drip^® Dispensing Valves

• Valves close material flow and seal at the valve outlet

• Ideal for dispensing abrasive and filled materials

• Carbide ball needle and carbide seats for long life

• Repeatable position mounting to EOA tooling

• Extrude, Spray, Stream and Ribbon apply materials

Available Options

• Dispensing low to medium viscosity materials

• Long service life dispensing applications

Snuf-Bak^® Dispensing Valves

• Valves close material flow and seal at the valve outlet

• Ideal for dispensing stringy, thixotropic materials

• Needle retracts when closing to sharply cut-off flow

• Repeatable position mounting to EOA tooling

• Accepts metal, compliance and plastic nozzles

Available Options

• Dispensing medium to high viscosity materials

• Long service life dispensing applications

Accessories: Dispense Nozzles and Tips

• For No-Drip® and Snuf-Bak™ dispense valves

• Extrusion nozzles: metal and plastic

• Compliance nozzles

• Stream and Spray nozzles

• Slotted ribbon nozzles

Typical Applications

• Robotically and manually apply one-part materials

Two-Component Mix-Dispense Valves

• No-Drip® or Snuf-Bak™ models

• Precision shroud and mounting positioning

• Carbon or Stainless Steel components

• Double-acting piston with wear resistant seals

• Accepts standard disposable mixers

Typical Applications

• Low to high viscosity abrasive materials

• Extrude or stream material beads

• Robotic and manual dispensing applications

No-Flush^™ Disposable Mixers and Shrouds

• Adapts to all 2200 Series 2-Part Dispense Valves

• Large selection of diameters and mix elements

• Extrude or stream beads onto the part accurately

• Dispense materials at low and high flow rates

• Orifice size is variable by trimming the tip

Typical Applications

• High speed streaming applications

• Lower speed extruded bead applications

• Robotic and manual dispensing applications

2600-019 Color Change Valves

• Quick-Service^™ valve design

• 4000 PSI Maximum Inlet pressure

• Double-acting divorced air/material design

• Long-life carbide ball needles and seats

• Part plugs for changing color quantity

• Expansion assemblies for adding colors

Typical Applications

• Longer life color change valve requirements

• For more efficient color change paint controls